48 Keysight CX3300 User’s Guide, Edition 4
Using the CX3300
Power On Screen
Opens the Setting dialog box used for acquisition, trigger, and channel setups.
Opens the Analysis dialog box used for analysis, function, and marker setups.
Layout. Shows/hides the menu used for setting ON/OFF of Analysis Views.
Application Launcher. Shows/hides shortcut to the Power and Current Profiler
and the Waveform Trend Analyzer.
Shows/hides the Auto Save toolbar at the bottom of Main Waveform. This
toolbar is used to control the automatic data save function.
Opens the Save dialog box used for saving data.
Opens the Load dialog box used for loading data.
Help. Shows/hides shortcut to Data Sheet, User’s Guide, Online Help, etc.
Utilities. Shows/hides shor
tcut to Configuration, Demo Wizard, Show Desktop,
Close Window, etc.
Summary Bar
The following summary boxes are available on the summary bar. Clicking a
summary box opens/closes the mini dialog box relative to it; Horizontal, Trigger,
Digital, or an analog input channel.
H Shows the horizontal summary; scale (s/), offset (s), high resolution mode ON
(HR) or OFF (none), sampling rate (Sa/s), and numbe
r of samples (pts).
T Shows the trigger setup summary; trigger type, slope/polarity/window/
condition, trigger sweep, trigger source, and trigger (high) level.
D Shows the pulse symbol which indicates the graph scale (small/medium/large)
for displaying the digital channel waveform.
1 / 2 / 3 / 4 Shows the analog channel setup summary; vertical scale, offset, sensor setup
information, bandwidth, and meas
urement range.
To Next Page
Loading...
