Keysight CX3322A User Manual

Keysight CX3300 User’s Guide, Edition 4 71
Using the CX3300
Using Data Logger Mode
External Storage Device
The following interfaces are available for connecting external storage devices.
Table 2-1 Interface of External Storage Devices
USB 3.0 is required for recording the waveform data at maximum sampling rate.
USB 3.0 which supports UASP (USB Attached SCSI Protocol) is preferred. UASP
device driver is pre-installed on the instrument with Windows 10. If your CX3300
is installed with Windows 7, upgrade it to use UASP device driver. Upgrade kit
CX3322AU-W10 or CX3324AU-W10 is required. Contact Keysight Technologies.
Interface Maximum Transfer Rate Maximum Raw Throughput
USB 2.0 (High-Speed) 480 Mbit/s
USB 3.0 (SuperSpeed) 5 Gbit/s 500 MBytes/s
Gigabit Ethernet 1 Gbit/s

Keysight CX3322A Specifications

General

Brand	Keysight
Model	CX3322A
Category	Measuring Instruments
Language	English