Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes User's Guide 7
When using the oscilloscope's utility
functions, see:
• Chapter 22, “Utility Settings,” starting on page 231
• Chapter 23, “Web Interface,” starting on page 249
For reference information, see: • Chapter 24, “Reference,” starting on page 261
When using serial bus triggering and
decode features, see:
• Chapter 25, “CAN Triggering and Serial Decode,”
starting on page 275
• Chapter 26, “I2C Triggering and Serial Decode,”
starting on page 285
• Chapter 27, “LIN Triggering and Serial Decode,”
starting on page 293
• Chapter 28, “SPI Triggering and Serial Decode,”
starting on page 301
• Chapter 29, “UART/RS232 Triggering and Serial
Decode,” starting on page 313
Abbreviated instructions for pressing a series of keys and softkeys
Instructions for pressing a series of keys are written in an abbreviated manner. Instructions for
pressing [Key1], then pressing Softkey2, then pressing Softkey3 are abbreviated as follows:
Press [Key1]> Softkey2 > Softkey3.
The keys may be a front panel [Key] or a Softkey. Softkeys are the six keys located directly
below the oscilloscope display.
To Next Page
Loading...
Need help?
General
