Keysight InfiniiVision 1200 X Series User Manual

91
Keysight InfiniiVision 1200 X-Series and EDUX1052A/G Oscilloscopes
User's Guide
10 Labels
To turn the label display on or off / 91
To assign a predefined label to a channel / 92
To define a new label / 93
To load a list of labels from a text file you create / 94
To reset the label library to the factory default / 95
You can define labels and assign them to each analog input channel, or you can
turn labels off to increase the waveform display area.
To turn the label display on or off
1 Press [Display] > Labels > Display.
This turns on labels for the displayed analog channels. Labels are displayed at
the left edge of the displayed traces.
The figure below shows an example of displayed labels.

Keysight InfiniiVision 1200 X Series Specifications

General

Brand	Keysight
Model	InfiniiVision 1200 X Series
Category	Test Equipment
Language	English