Keysight N6701C - Page 214

To Next Page

To Previous Page

Trapezoid

Back to ARB Commands

[SOURce:]ARB:CURRent:TRAPezoid:END:TIMe <value>, (@<chanlist>)

[SOURce:]ARB:CURRent:TRAPezoid:END:TIMe? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:VOLTage:TRAPezoid:END:TIMe<value>, (@<chanlist>)

[SOURce:]ARB:VOLTage:TRAPezoid:END:TIMe? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:POWer:TRAPezoid:END:TIMe<value>, (@<chanlist>)

[SOURce:]ARB:POWer:TRAPezoid:END:TIMe? [MIN|MAX,] (@<chanlist>)

[SOURce:]ARB:RESISTANCE:TRAPezoid:END:TIMe<value>, (@<chanlist>)

[SOURce:]ARB:RESISTANCE:TRAPezoid:END:TIMe? [MIN|MAX,] (@<chanlist>)

Specifies the time in seconds, after the trapezoid, that the starting current, voltage, or resistance level

persists.

[SOURce:]ARB:SEQuence:STEP:CURRent:TRAPezoid:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:CURRent:TRAPezoid:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:TRAPezoid:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:VOLTage:TRAPezoid:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:POWer:TRAPezoid:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:POWer:TRAPezoid:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:RESISTANCE:TRAPezoid:END:TIMe <value>, <step#>, (@<chanlist>)

[SOURce:]ARB:SEQuence:STEP:RESISTANCE:TRAPezoid:END:TIMe? [MIN|MAX,] <step#>, (@<chanlist>)

Specifies the time in seconds, after the trapezoid, that the starting current, voltage, power, or

resistance level persists for Arb sequence steps.

Parameter Typical Return

0 – 262.144 | MIN | MAX, *RST 0 <end time>

Step 0 - 99, *RST 0 (none)

Programs an end time after the current trapezoid: ARB:CURR:TRAP:END:TIM 2,(@1)

Programs an end time after the voltage trapezoid: ARB:VOLT:TRAP:END:TIM 2,(@1)

Programs an end time after the power trapezoid: ARB:POW:TRAP:END:TIM 2,(@1)

Programs an end time after the resistance trapezoid: ARB:RESISTANCE:TRAP:END:TIM 2,(@1)

Programs an end time for step 0:ARB:SEQ:STEP:CURR:TRAP:END:TIM 2, 0,(@1)

5 SCPI Programming Reference

214 Keysight N6700C Operating and Service Guide

Related product manuals