Keysight N6701C - Page 391

Test Record Form - Keysight N6774A
Keysight N6774A Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Constant Voltage Tests
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
+ 5 mV
Vout − 35 mV
34.93 V
Vout − 70 mV
_______
_______
_______
_______
+ 75 mV
Vout + 35 mV
35.07 V
Vout + 70 mV
CV Load Effect: – 16 mV _______ + 16 mV
CV Source Effect: – 4 mV _______ + 4 mV
CV Ripple and Noise
peak-to-peak:
rms:
N/A
N/A
_______
_______
+ 22 mV
+ 5 mV
Transient response
Voltage @ 250 μs:
Voltage @ 250 μs with Option 760/761:
– 300 mV
– 350 mV
_______
_______
+ 300 mV
+ 350 mV
Constant Current Tests
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
− 45 mA
Iout − 12 mA
8.42725 A
Iout − 24.75 mA
_______
_______
_______
_______
+ 75 mA
Iout + 12 mA
8.57275 A
Iout + 24.75 mA
CC Load Effect: – 6 mA _______ + 6 mA
CC Source Effect: – 1 mA _______ + 1 mA
Test Description N6774A Setting
Voltage Programming & Readback Min Voltage:
Voltage Programming & Readback High Voltage:
CV Load Effect, Source Effect, Ripple and Noise:
Transient Response:
Current Programming & Readback Min Current:
Current Programming & Readback High Current:
CC Load Effect, Source Effect:
40 mV, 8.5 A
35 V, 8.5 A
35 V, 8.5 A
35 V, from 4.25 A to 8.5 A
15 mA, 35 V
8.5 A, 35 V
8.5 A, 35 V
Keysight N6700C Operating and Service Guide 391
6 Verification and Calibration