Keysight N6701C - Page 392

Test Record Form - Keysight N6775A
Keysight N6775A Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Constant Voltage Tests
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
+ 10 mV
Vout − 60 mV
59.88 V
Vout − 120 mV
_______
_______
_______
_______
+ 130 mV
Vout + 60 mV
60.12 V
Vout + 120 mV
CV Load Effect: – 24 mV _______ + 24 mV
CV Source Effect: – 6 mV _______ + 6 mV
CV Ripple and Noise
peak-to-peak:
rms:
N/A
N/A
_______
_______
+ 35 mV
+ 9 mV
Transient response
Voltage @ 250 μs: – 500 mV _______ + 500 mV
Constant Current Tests
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
− 52.5 mA
Iout − 12 mA
4.9325 A
Iout − 19.5 mA
_______
_______
_______
_______
+ 67.5 mA
Iout + 12 mA
5.0675 A
Iout + 19.5 mA
CC Load Effect: – 6 mA _______ + 6 mA
CC Source Effect: – 1 mA _______ + 1 mA
Test Description N6774A Setting
Voltage Programming & Readback Min Voltage:
Voltage Programming & Readback High Voltage:
CV Load Effect, Source Effect, Ripple and Noise:
Transient Response:
Current Programming & Readback Min Current:
Current Programming & Readback High Current:
CC Load Effect, Source Effect:
70 mV, 5 A
60 V, 5 A
60 V, 5 A
60 V, from 2.5 A to 5 A
7.5 mA, 60 V
5 A, 60 V
5 A, 60 V
6 Verification and Calibration
392 Keysight N6700C Operating and Service Guide