Keysight N6701C - Page 393

Test Record Form - Keysight N6776A
Keysight N6776A Report Number ______ Date__________
Test Description Model Min. Specs Results Max. Specs
Constant Voltage Tests
Voltage Programming & Readback
Minimum voltage (Vout):
Voltage measured over interface:
High voltage (Vout):
Voltage measured over interface:
+ 0 mV
Vout − 100 mV
99.8 V
Vout − 200 mV
_______
_______
_______
_______
+ 200 mV
Vout + 100 mV
100.2 V
Vout + 200 mV
CV Load Effect: – 45 mV _______ + 45 mV
CV Source Effect: – 10 mV _______ + 10 mV
CV Ripple and Noise
peak-to-peak:
rms:
N/A
N/A
_______
_______
+ 45 mV
+ 18 mV
Transient response
Voltage @ 250 μs: – 1000 mV _______ + 1000 mV
Constant Current Tests
Current Programming & Readback
Minimum current (Iout):
Current measured over interface:
High current (Iout):
Current measured over interface:
− 25.5 mA
Iout − 6 mA
2.9655 A
Iout − 10.5 mA
_______
_______
_______
_______
+ 34.5 mA
Iout + 6 mA
3.0345 A
Iout + 10.5 mA
CC Load Effect: – 6 mA _______ + 6 mA
CC Source Effect: – 1 mA _______ + 1 mA
Test Description N6776A Setting
Voltage Programming & Readback Min Voltage:
Voltage Programming & Readback High Voltage:
CV Load Effect, Source Effect, Ripple and Noise:
Transient Response:
Current Programming & Readback Min Current:
Current Programming & Readback High Current:
CC Load Effect, Source Effect:
100 mV, 3 A
100 V, 3 A
100 V, 3 A
100 V, from 1.5 A to 3 A
4.5 mA, 100 V
3 A, 100 V
3 A, 100 V
Keysight N6700C Operating and Service Guide 393
6 Verification and Calibration