3 VMA Mode
3.7 Power Stat CCDF Measurement
Info BW
Allows you to enter a frequency value to set the channel bandwidth that will be used
for data acquisition. When in Auto, it is set to the value that covers carriers set by
carrier configuration.
Remote
Command
[:SENSe]:PSTatistic:BANDwidth <freq>
[:SENSe]:PSTatistic:BANDwidth?
Example
:PST:BAND 8 MHz
:PST:BAND?
Notes Auto/Man is available only for 5G NR, LTE, LTETDD, LTEAFDD, LTEA TDD
Preset Depends on Mode and installed Options. See "Preset Values" on page 1119 below
State Saved Saved in instrument state
Min 10 kHz
Max Hardware-dependent:
RF Input
–
No Option = 10 MHz
–
WB (25 MHz or wider) = Hardware Option Limit
I/Q Input (for I+jQ)
–
No Option = 20 MHz
–
Option B25 = 50 MHz
Backwards
Compatibility
SCPI
[:SENSe]:PSTatistic:BWIDth
Auto Function
Remote
Command
[:SENSe]:PSTatistic:BANDwidth:AUTO ON | OFF | 1 | 0
[:SENSe]:PSTatistic:BANDwidth:AUTO
Example
:PST:BAND:AUTO 0
:PST:BAND:AUTO?
Preset
ON
Preset Values
Modes Option Preset Values
SA, WCDMA All 5 MHz
CQM All 10 MHz
LTEATDD, LTEAFDD, 5G NR All Automatically calculated
1119 Vector Modulation Analyzer Mode User's &Programmer's Reference
To Next Page
Loading...
