Keysight N9041B - 6.1.11.6 FM Deviation; 6.1.11.7 FM Rate; 6.1.11.8 FM Rate Increment

6 Input/Output
6.1 RF Source
6.1.11.6 FM Deviation
Lets you set the frequency modulation deviation.
Remote Command
:SOURce:FM[:DEViation] <freq>
:SOURce:FM[:DEViation]?
Example
:SOUR:FM 1.00 kHz
Dependencies Not available in E7760B
Preset 1.00 Hz
Min 1.00 Hz
Max 100.00 kHz
6.1.11.7 FM Rate
Lets you set the internal frequency modulation rate.
Remote Command
:SOURce:FM:INTernal:FREQuency <freq>
:SOURce:FM:INTernal:FREQuency?
Example
:SOUR:FM:INT:FREQ 40.0 Hz
Dependencies Not available in E7760B
Preset 400.0 Hz
Min 10 Hz
Max 40 kHz
6.1.11.8 FM Rate Increment
Changes the step size for "FM Rate" on page 2070. Once an increment size has been
selected and FM Rate is active, the step keys (and the UP|DOWN parameters for FM
Rate from remote commands) change FM Rate by the increment value.
Remote
Command
:SOURce:FM:INTernal:FREQuency:STEP[:INCRement] <freq>
:SOURce:FM:INTernal:FREQuency:STEP[:INCRement]?
Example
:SOUR:FM:INT:FREQ:STEP 100 Hz
:SOUR:FM:INT:FREQ:STEP?
Couplings Coupled to the increment size of FM Rate
Preset 10 Hz
State Saved Yes
Min 1 Hz
Max 40 kHz
Vector Modulation Analyzer Mode User's &Programmer's Reference 2070