109
Key Reference
File
Load Accesses a submenu to load analyzer states, traces and
limits into the analyzer from a USB storage device or
internal storage (Local).
Trace Displays all previously saved trace files
(.TRA) and detects the current trace in
preparation to save it in a file (.TRA).
Save individual traces or a group of
traces.
Limits Displays all previously saved limits files
(.LIM) and detects the current limits in
preparation to save them in a file
(.LIM). Limits provide data sets to
determine whether a trace has exceeded
preset specifications.
Source When Ty pe is Trace, you can select trace 1, 2, 3 or
4 in addition to the state. All Traces is selected to
save all four traces in a single file, along with the
state.
When Typ e is Limits, Source accesses the Limit 1 and
2 softkeys. Limit 1 and 2 provide data sets to
determine whether a measurement trace has
exceeded preset specifications.
Key access: > Save
Name Accesses the softkeys to enter the filename.
Key access: > Save
File/
Print
File/
Print
NOTE
Only capital letters and digits may appear in file names. The analyzer
will automatically add the three character file extension name.
To Next Page
Loading...
