Key Reference
File
110
Key access:
Load
Now
Executes
the load file function. When load
completed, the message “local(USB)/XXX file loaded”
appears in the status bar (where XXX is the
filename).
Key access: > Load
Typ e To select the type of file to be loaded.
Key access: > Load
State Displays all state file types listed in
the storage location (.STA). Loading a
state file type restores most
parameters to the instrument settings.
Trace Displays all trace file types (.TRA).
Load traces individually or as a group.
Loading a trace also loads the current
state, and sets the trace to view mode.
Limits Displays all limits file types. The limits
data points in these files may help
determine whether a trace has
exceeded preset specifications (.LIM).
Limits are loaded individually only.
Sort Accesses a submenu to view your saved files
according to a selected file attribute. The
selections include, By Date, By Name, and Order Up
Down. Order (Up) sorts files in ascending order
(such as A,B,C). Order (Down) sorts files in
descending order (such as C,B,A).
Key access: > Load
Destination With Ty pe set to Trace, Destination directs the
data to Trace 1, 2, 3 or 4. If the data is for all
four traces (for instance, Source was All Traces
when they were saved), the data returns to the
original trace registers.
When Ty pe is set to Limits, Destination allows you
to direct your data to Limit 1 or Limit 2.
Key access: > Load
File/
Print
File/
Print
File/
Print
File/
Print
File/
Print
To Next Page
Loading...
