EasyManua.ls Logo

Kia FORTE 2022 - Page 166

Kia FORTE 2022
514 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Features of your vehicle
904
Lighting
We recommend that you have your vehi
-
cle inspected by an authorized Kia
dealer.
CAUTION
The function may not operate normally
if any of the following conditions should
occur:
1. When the illumination from an on-
coming vehicle or a vehicle in front is
dim. Such examples may include:
When the headlamps of an oncom
-
ing vehicle or the tail lamps of a
vehicle in front is covered with dust,
snow, or water
When the headlamps on an on-
coming vehicle are OFF, but the fog
lamps are ON)
2. When High Beam Assist is adversely
affected by an external condition.
Such examples may include:
When the vehicle's headlamps have
been damaged or not repaired
properly
僅When the vehicle headlamps are
not aimed properly
When the vehicle is driven on a nar
-
row curved road or rough road
When the vehicle is driven on an
uphill road or downhill road
When only part of the vehicle in
front is visible on a crossroad or
curved road
When there is a traffic light, reflect
-
ing sign, flashing sign or mirror
When the road conditions are bad
such as being wet or covered with
snow
When a vehicle suddenly appears
from a curve
When the vehicle is tilted from a flat
tire or being towed
When Lane Keeping Assist warning
light illuminates
When the light from the oncoming
or front vehicle is not detected
because of exhaust fume, smoke,
fog, snow, etc.
When the front window is covered
with foreign matters such as ice,
dust, fog, or is damaged
3. When the forward visibility is poor.
Such examples may include:
When the headlamps of an oncom
-
ing vehicle or a vehicle in front is
not detected due to poor outside
visibility (smog, smoke, dust, fog,
heavy rain, snow, etc.)
When the windshield visibility is
poor
CAUTION
The function may not work around 15
seconds after starting the vehicle or
the initialization or rebooting of the
front view camera.
Do not attempt to disassemble the
front view camera without the assis
-
tance of an authorized Kia dealer
technician.
If the front view camera is removed
for any reason, the function may need
to be re-calibrated. We recommend
that the function be inspected by an
authorized Kia dealer.
If the windshield of your vehicle is
replaced, most likely the front view
camera will need to be re-calibrated. If
this occurs, have your vehicle
inspected and have the function re-
calibrated by an authorized Kia
dealer.
Be careful that water doesn't get into
related parts of High Beam Assist and

Table of Contents

Related product manuals