What to do in an emergency
286
If you have a flat tire (with Tire Mobility Kit)
The sealant container and insert hose (3)
cannot be reused. Purchase an extra
after use.
Using the Tire Mobility Kit
1. Detach the speed restriction label (1)
from the sealant bottle (2), and place
it in a highly visible place inside the
vehicle such as on the steering wheel
to remind the driver not to drive too
fast.
2. Filling the sealant Strictly follow the
specified sequence, otherwise the
sealant may escape under high pres
-
sure.
Before using the Tire Mobility Kit, please
read carefully the instruction attached
on the sealant case. Detach the speed
limit label on the sealant case and put it
on a highly visible place. Always drive
within the speed limit.
3. Shake the sealant bottle.
4. Connect the filling hose (3) onto the
connector of the sealant bottle.
5. Ensure that button (7) on the com
-
pressor is not pressed.
6. Unscrew the valve cap from the valve
of the defective wheel and screw fill
-
ing hose (3) of the sealant bottle onto
the valve.
To Next Page
Loading...
