27
6
6
Driver assistance system Blind-Spot View Monitor (BVM)
Blind-Spot View Monitor
(BVM) (if equipped)
Left
Right
Blind-Spot View Monitor displays the
rear blind spot area of the vehicle in the
cluster when the turn signal is turned on
to help safely change lanes.
Detecting sensor
Wide-side view camera/Outside mirror
Blind-Spot View Monitor settings
Blind-Spot View
With the vehicle on, select
Setup
→
Vehicle
→
Driver Assistance
→
Driving
Safety
→
Blind-Spot View Monitor
from the infotainment system screen to
turn on Blind-Spot View Monitor and
deselect to turn off the function.
Blind-Spot View Monitor opera
-
tion
Turn signal lever
Blind-Spot View Monitor will turn on and
off when the turn signal is turned on and
off.
Blind-Spot View Monitor
Operating conditions
僅 When the left or right turn signal turns
on, the image on the instrument clus
-
ter will turn on.
Off conditions
Blind-Spot View Monitor will turn off
when one of the following conditions are
satisfied:
僅 When the turn signal is turned off.
僅 When the hazard warning flasher is
on.
僅 When other important warning is dis
-
played on the instrument cluster.
Blind-Spot View Monitor mal
-
function
When Blind-Spot View Monitor is not
working properly, or the cluster display
flickers, or the camera image does not
display normally, have Blind-Spot View
Monitor be inspected by a professional
workshop. Kia recommends visiting an
authorized Kia dealer/service partner.
To Next Page
Loading...
