Driver assistance system
286
Lane Following Assist (LFA)
僅 Blind-Spot View Monitor may display
objects at a different distance from
what is shown on the screen due to
the correction of the wide-side view
camera images. Make sure to directly
check the vehicle's surroundings for
safety.
僅 If the camera lens is covered with for
-
eign material, Blind-Spot View Moni
-
tor may not operate normally.
Always keep the camera lens clean.
However, do not use chemical sol
-
vents such as strong detergents con
-
taining high alkaline or volatile
organic solvents (gasoline, acetone
etc.). This may damage the camera
lens.
Lane Following Assist (LFA)
Lane Following Assist detects lane mark
-
ings and/or a vehicle ahead on the road,
and centre your vehicle in the lane.
Detecting sensor
Front view camera
The front view camera is used as a
detecting sensor to detect lane markings
and front vehicles.
Refer to the picture above for the
detailed location of the detecting sensor.
For more details on the precautions of
the front view camera, refer to "Forward
Collision-Avoidance Assist (FCA) (Front
Camera Only) (if equipped)" on page 6-
3.
Lane Following Assist settings
Warning Methods
To Next Page
Loading...
