8 Overvoltage Category TOS8030
Organization of the Operation Manual
The information in this manual is organized into the following chapters:
Chapter 1 General
Provides a product overview and describes features and options.
Chapter 2 Installation and Preparations for Use
Describes how to unpack the tester for preparation before use.
Chapter 3 Precautions for Safe Testing
Gives the precautions to be observed at all times to ensure safe testing.
Chapter 4 Part Name’s and Functions
Gives the names of switches, terminals, and other controls of the TOS8030.
Chapter 5 Panel Operations
Describes procedures for testing.
Chapter 6 Remote Control
Gives the procedure for operating the tester from a remote location using the
REMOTE connector and the INTERLOCK terminal.
Chapter 7 Status Signal Output
Describes the status signal outputs (SIGNAL OUT).
Chapter 8 Maintenance and Calibration
Describes the maintenance and calibration of the tester. The tester must be periodi-
cally inspected, maintained, and calibrated to maintain performance.
Chapter 9 Specifications
Provides the electrical and mechanical specifications for the TOS8030.
Appendix
Provides guidelines for zero-start switch.
To Next Page
