Kikusui TOS8030 - Page 9

TOS8030 Safety Precautions 7
Front and rear panels
• Before using the tester, make sure you read and understand Chapter 3, “Precau-
tions for Safe Testing.”
NC03368-1
MADE IN TAIWAN
When the voltage is
displayed here,
hazardous high
voltage is present.
Press STOP before
changing test
conditions.
Set the TEST VOLTAGE
knob to the MIN position
unless actually testing.
Danger
High-voltage
output terminal
Before turning the POWER
switch on, confirm that the
TEST VOLTAGE knob is set
to the MIN position.
Always connect the power
cordʼs protective conductor
terminal to ground.
If this lamp goes on,
hazardous high voltage
is present.
When connecting test
leads, connect the LOW
voltage terminal first.
INTERLOCKterminal