7. Alarm / relay settings
7.c - Alarm / relay functions and LED colour codes
7.c.1 - Visual / audible alarms
Class 300 transmitters have 2 visual / audible alarms located in front of the transmitter, allowing to know the
condition of the setpoints.
Alarm LED colour codes
Green The alarm function is activated and
the set point is not reached
Red The alarm function is activated and
the setpoint is reached
None The alarm function is not activated
The red LED appears when the setpoint is reached,
taking into account the time-delay and the action type
(falling or rising).
See page 17 for more details.
Audible alarm
Once the alarm is activated, an alarm sounds
whilst the setpoint is reached.
The BEEP alarm function must be activated to use the
audible alarm. See page 12.
Page 13
Alarm n°2Alarm n°1
CPE 300 transmitter configuration via remote control / Modbus
To Next Page
Loading...
