1. Prerequisite
Page 1
1.a - Working principle
Using remote control and optional Modbus configuration, you can change units of measurement, set setpoints and
relays...
Principle: the configuration options are accessed via folders and sub-folders (similar to Windows ). Access is
made via a numerical code (full details in this manual).
®
Visual alarm
LED
Alphanumeric
display
infrared receiver
Meaning of the keys
To increment a value or a level
To decrement a value or a level
To validate an input
To cancel an input or to return to the previous step
Channel selection
With this selector, you can swap the transmission channel so that it
matchs with the transmitter reception channel. See page 6 to configure
the transmitter reception channel.
CPE 300 transmitter configuration via remote control / Modbus
To Next Page
Loading...
