7 Transfer files to a PC
This function allows to transfer data towards a computer through a USB cable. LDB200 software has been previously installed on the
computer.
➢ Connect the instrument to the PC through the USB cable.
➢ Go to « PC » screen of the sound level meter : from the menu icon, select PC then OK.
➢ Press OK key again to activate USB icon.
The connection to the PC is shown on the screen of the sound level meter.
File format : files have a specific termination for each measurement mode :
• L-St mode : S01_2409LPF
• L-Leq mode : S05_2409LPQ
• Leq-St mode : S03_2109LEQ
• S1+S2 mode : S04_2409LS1
With S01 : order number ; 2409 : day month ; LPF : extension
Transfer files to a PC 24
To Next Page
Loading...
