8 Reset memory
After datasets storing thanks to the transfer to computer, it's possible to erase sound level meter memory. There are two methods :
• Through sound level meter (see below)
• Through computer (see LDB200 software user manual)
Through the sound level meter :
➢ Go to « PC » screen of the sound level meter : from the menu icon, select PC then OK.
➢ Move the cursor to RST with left arrow key.
➢ Press OK key, RST blinks.
➢ Press OK key to delete all data, progress bar is displayed.
➢ Press Esc key to quit this file and back to file selection main screen.
25 Reset memory
Menu
Progression
of deletion
All the sessions in the sound level meter will be permanently deleted.
To Next Page
Loading...
