EasyManua.ls Logo

Kimo DB 200 - 11.8 Power and Storage Autonomy

Kimo DB 200
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Integration time or sampling rate Maximum measurement time (in hours) Maximum measurement time (in days)
1s 24 1
2s 48 2
3s 72 3
5s 120 5
10s 240 10
15s 360 15
30s 720 30
60s 1440 60
11.8 Power and storage autonomy
Measurement autonomies linked to power are given for a running at 20°C and backlight off. Beware of declining capacity of the battery
or batteries for measurement at low temperature.
Batteries pack : 3 alkaline batteries 1,5V – LR6/AA type
Autonomy (20°C) : 15H in continuous
Battery : rechargeable Li-Ion type : 3,7 V – 4400 mAh.
Caution : Li-Ion battery is a delicate element. Take care when manipulating or storing.
Autonomy (20°C) : > 24H in continuous
Mains supply – charger : type universal USB format – ref : AS-123
PRI :100V – 240V - 60/50Hz – 150 mA
SEC : 5V - 1000mA - 5VA
Autonomy : unlimited, depending on memory capacity of the measurement (see table above).
Note : When a connection to a PC for data transfer, the USB computer delivers a voltage of 5V DC 500mA under. This power supply
has priority over the battery pack or battery that is recharged through this power supply.
34 Technical features
In the event of a reset of the memory by the sound level meter or through the
software LDB200, all the memory is erased.

Table of Contents

Related product manuals