Kimo mp210 - Delta T Channel Configuration

6.3 Delta T
➢ Connect the thermocouple module then the probes.
In the “Channels” menu :
➢ Select with arrow keys the sub-menu “Delta T” then press OK.
➢ Select “Channel number” and press OK.
➢ Select a channel number and press OK.
➢ Select the channels in which Delta T will be calculated.
➢ Go to “Channel A” with arrow keys and press OK.
➢ Select the channel T1, T2, T3 or T4 and press OK.
➢ Go to “Channel B” with arrow keys and press OK.
➢ Select the channel T1, T2, T3 or T4 and press OK.
➢ Press the key “Measurement”.
The instrument displays the measurements.
Channel configuration 17