Kimo mp210 User Manual

8.1.4 Alarm
Température :
➢ Go to the line “Temp.alarm” and press OK.
➢ Select “High alarm” and/or “Low alarm” by pressing OK.
It is possible to set the high and low thresholds.
➢ Go to the line “High threshold” and press OK.
➢ Set the threshold with the arrow keys between -9999.9 and 9999.9°C then press OK.
➢ Go to the line “Low threshold” and press OK.
➢ Set the threshold with the arrow keys between -9999.9 and 9999.9°C then press OK.
8.1.5 Integration
Pressure, airflow and air velocity
➢ Go the line “Integration” and press OK.
➢ Select the integration coefficient between 0 and 9 with the arro keys.
➢ Press OK to validate.
8.1.6 Atmospheric pressure
Air velocity :
➢ Go to the line “Atmo. Press.” and press OK.
➢ Select the atmospheric pressure with the arrow keys between 800 and 1200 hPa.
➢ Press OK to validate.
8.1.7 Temperature compensation
Temperature :
➢ Go to the line “Temp.Comp” then press OK.
➢ Set the compensation temperature with the arrow keys between -200 and 1300 °C.
➢ Press OK to validate.
8.2 Thermocouple module
8.2.1 Unit
➢ Go to the line “Temperature” and press OK.
➢ Select the required unit : °C or °F
➢ Press OK to validate the unit selection.
8.2.2 Type
➢ Go to the line “Type Tc” and press OK.« ».
➢ Select the type of thermocouple : K, T, J and S
➢ Press OK to validate.
8.2.3 Alarm
➢ Go to the line “Temp.alarm” and press OK.
➢ Select “High alarm” and/or “Low alarm” by pressing OK.
It is possible to set the high and low thresholds.
➢ Go to the line “High threshold” and press OK.
➢ Set the threshold with the arrow keys between -9999.9 and 9999.9°C then press OK.
➢ Go to the line “Low threshold” and press OK.
➢ Set the threshold with the arrow keys between -9999.9 and 9999.9°C then press OK.
Setting of measurement parameters 23

Kimo mp210 Specifications

General

Brand	Kimo
Model	mp210
Category	Measuring Instruments
Language	English