Kinetec Spectra User Manual

Manuel d'utilisationManuel d'utilisation
Avant toute utilisation lire ce document.
AbilityOne Kinetec se réserve le droit de toutes modifications techniques.
User manualUser manual
Before use, please read this document.
AbilityOne Kinetec reserves the right to effect technical modifications.
BedienungsanleitungBedienungsanleitung
Vor Benutzung unbedingt dieses Dokument lesen.
AbilityOne Kinetec behält sich das Recht vor, jegliche technische Änderung durchzuführen.
Istruzioni per l’usoIstruzioni per l’uso
Prima di mettere in funzione l’apparecchio leggere con attenzione il presente documento.
La AbilityOne Kinetec si riserva il diritto di apportare modifiche tecniche.
Manual de empleoManual de empleo
Antes de cualquier utilización, lea este documento.
AbilityOne Kinetec se reserva el derecho a cualquier modificación técnica.
F
GB
D
I
E
Your contact:

Kinetec Spectra Specifications

General

Type	Continuous Passive Motion (CPM) Machine
Application	Knee rehabilitation
Weight	12 kg
Power Supply	100-240V AC, 50/60 Hz
Patient Height	145 to 195 cm (4'9" to 6'5")

Summary

Safety Recommendations

Explosion Hazard Warning

Warning against use with flammable anesthetics.

Electrical Safety Checks

Description of Components

KINETEC Spectra Components

Hand Control Interface

Details the buttons and display elements of the hand control unit.

General Safety and Compliance

Explosion Hazard Warning

KINETEC Spectra is not for use with flammable anesthetics.

Electrical Connection and Unit Startup

Power Supply Connection

Steps for connecting the power supply cable and hand control.

Initializing the Unit

Hand Control Operations - Basic Functions

Locking the Hand Control Setting

START/STOP/REVERSE Function

Explains how to start, stop, and reverse the movement using the hand control.

Quick Start and Parameter Values

Setting Up the Patient for Quick Start

Adjusting Basic Movement Parameters

Changing Extension/Flexion Limits

Procedure to display and change movement limits.

Adjusting Pause Parameters

Modifying Programs - PROGRAM MODE

Changing Treatment Program

How to change the selected treatment program.

Choosing Treatment Mode

Modifying Programs - PROGRAM MODE (Continued)

Changing Movement Limits

Recording a Program

Steps to save a custom program.

Cancelling a Program

Using Programs

Accessing and Changing Programs

Steps to access the program mode and select different programs.

Starting the Unit with a Program

Reading Program Values - Example SPEED

Accessing Program Mode for Reading

Reading Specific Parameter Value (e.g., Speed)

How to display a specific parameter value like speed.

Using the WARM UP Key

Selecting the Warm Up Mode

Warm Up Rules and Progression

Defining Patient Tolerance - Start of Session

Selecting the MODULATION Mode

How to set patient tolerance at the beginning of a session.

Setting Pain Level Limits

Procedure to select and set pain level limits for movement.

Starting Session with New Limits

Defining Patient Tolerance - During Session

Selecting the BY-PASS Mode

How to use BY-PASS mode to address pain during a session.

Setting New Pain Level During Session

Procedure to adjust pain level limits while the machine is running.

Setting up the Patient

Patient Positioning and Measurement

Instructions for placing the patient and adjusting supports.

Adjusting Axis Alignment

Importance of aligning the machine with the patient's hip and knee axes.

Product Information - Maintenance and Troubleshooting

Maintenance Requirements

Troubleshooting Common Issues