Kinetec CEM - User Manual

KINETEC CEM™
Manuel d'utilisation
Avant toute utilisation lire ce document.
Kinetec se réserve le droit de toutes modifications techniques.
FR
User manual
Before use, please read this document.
Kinetec reserves the right to effect technical modifications.
EN
Bedienungsanleitung
Vor Benutzung unbedingt dieses Dokument lesen.
Kinetec behält sich das Recht vor, jegliche technische Änderung
durchzuführen.
DE
467896366 – 12/2014
Série 1-2
Notice Originale

Summary

KINETEC CEM Device Description

Indications for KINETEC CEM

Clinical Benefits of KINETEC CEM

Outlines the advantages and positive outcomes of using the device.

Contraindications for KINETEC CEM

Specifies conditions or situations where the device should not be used.

KINETEC CEM Safety Warnings

Crucial safety advice, precautions, and potential hazards associated with device use.

Installing the KINETEC CEM Device

Steps and requirements for setting up the KINETEC CEM™ device.

KINETEC CEM Basic Assembly

Assembling KINETEC CEM Kit Components

Using the KINETEC CEM Hand Control

KINETEC CEM Electrical Connection and Safety

Ensuring safe and correct electrical connection of the device.

Starting the KINETEC CEM Unit

Procedure for powering on and initializing the device.

KINETEC CEM Start;Stop;Reverse Function

Using the hand control buttons to start, stop, or reverse movement.

Procedure to Stop the KINETEC CEM Machine

Quick Start for KINETEC CEM

Steps for initiating a session using previous parameters.

Setting KINETEC CEM Single Movement Parameters

Guide to adjusting individual movement parameters like limits, speed, and force.

PROGRAM MODE: Entering Programs on KINETEC CEM

Instructions on how to create, save, and manage treatment programs.

Using Programs on KINETEC CEM

Using the KINETEC CEM Warm Up Key

Defining Patient Tolerance at Session Start

Setting patient-specific movement limits (MODULATION Mode) before a session.

Defining Patient Tolerance During Session (BYPASS)

Adjusting patient limits while the machine is running (BYPASS Mode).

Setting Up the Patient for Treatment

Setting Patient Shoulder Axis Position

Setting Patient Arm Lengths and Pronation

Starting Patient Movement on KINETEC CEM

KINETEC CEM Product Information

KINETEC CEM Maintenance Schedule

KINETEC CEM Troubleshooting Guide

Solutions for common problems and error messages displayed by the device.

Kinetec CEM Specifications

General

Brand	Kinetec
Model	CEM
Category	Medical Equipment
Language	English