KINETEC CEM™
4/22
EN
DESCRIPTION
7. Unpacking and packing
Unpacking
When you unpack the machine, don't forget that you may need to pack it up again. We recommend that you keep the packaging
materials, boxes and plastic bags.
Your KINETEC CEM™ device is delivered in two boxes
- Box 1: Centura device (including the chair)
- Box 2: Accessories specific to the KINETEC CEM™ device
Recommendations for plastic bags: do not put them over
the head as there is a risk of suffocation, and keep them out
of the reach of children.
Be careful with small-sized pieces: they could be swallowed
by a child.
Be careful with cables and wires: risk of strangulation.
Packing
To prevent any problems when the machine is transported, only pack
it using its original packaging.
- Remove all accessories from the machine.
Box 1:
- Fold the machine into the transport position (see page 5).
- Pack each element in a plastic bag.
- Put the elements in the two boxes; do not place anything between
the boxes.
• Box A – the motor units
• Box B – the other accessories, except for the arm rest
- Place the machine in its box.
Box 2:
- Put the accessories specific to the KINETEC CEM™ in this box.
8. Installing the device
The device KINETEC CEM™ machine is designed to be used in
hospitals, clinics, doctors' offices or in private homes (rental).
The machine is delivered with its own chair. It must not be used
with another chair.
The machine must be installed on a flat surface that is wide
enough to accommodate the entire device; you should leave a
free space of 1 m (39 ins.) on each side.
Box
To Next Page
Loading...
