1313
GB
Use of the hand controlUse of the hand control
Using ProgramsUsing Programs
The KINETEC Spectra allows you to store up to 16 programs, including the type of treatment, ROM, speed, load, pauses and timer.
The original parameter values of the program are empty.
These values can be modified and recorded at any time (see ‘How to enter a program’ page 10).
Beginning Keys to press Display Remarks
To stop the unit
Check if the hand control is not blocked
(See page 7).
To access the program mode The program number blinks.
To change the program if necessary or The new program number blinks.
To exit and validate the selected program
The current parameters have been recorded in
program 3.
To exit without validation of selected program Back to the starting parameters.
Start the unit
The value change at the speed of the
movement.
Comments:Comments:
• The values shown in the ‘Display’ column are examples. They actually depend on the stored programs.
• The current movement parameters can be changed while using that program but no data will be stored in the original program.
See the programming mode (p 10) to modify programs.
To Next Page
Loading...
