King-Meter Digital II - Use Parameter Setting

7.3.2 Password modification
PS
stands for the password. Short press
value. After modification, long press
【
7.4 Use parameter setting
Press 【UP】 and 【DOWN】
at the same time for
and【DOWN】at the same time for
2s, to
“P 1”
is shown on the screen, it means to need input the permission password. Short press
【UP】/【DOWN】
to increase/decrease the input value.
to confirm. If the password is correct, enter the
password input status. Long press 【
MODE
7.4.1 Wheel Size Setting
LD stands for wheel size.
The settable values are:
by pressing 【UP】/【DOWN】, t
o ensure the accuracy of the display speed and the trip distance.
to confirm and enter the speed limit settin
7.4.2 Speed Limit Setting
LS stands for speed limit.
The default maximum riding speed of the
the maximum riding speed of the e-
bike
supply to the motor to protect the safe driving of the rider.
between 12Km/h and 40Km/h. Set by pressing
【MODE】 to save
and exit the setting.
KING-
METER TECHNOLOGY
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
Fax：
+0086 022 8478 0358
10
stands for the password. Short press
【MODE】to shift, use 【UP】/【DOWN】
to increase/de
【
MODE】
to save and confirm, and exit the setting interface.
at the same time for
2s, to enter the general
setting status. Then
2s, to
enter the use parameter setting status.
is shown on the screen, it means to need input the permission password. Short press
to increase/decrease the input value.
After entering the 4-digit p
assword,
to confirm. If the password is correct, enter the
power-on password usage
setting interface
MODE
】to exit. The permission password is 0512.
The settable values are:
16、18、20、22、24、26、700C、28.
Select the e
o ensure the accuracy of the display speed and the trip distance.
to confirm and enter the speed limit settin
g interface.
The default maximum riding speed of the
display
is 25Km/h. Changing this value can set
bike
. When the e-bike
exceeds the set value, the controller will s
supply to the motor to protect the safe driving of the rider.
The optional range of max speed setting value is
between 12Km/h and 40Km/h. Set by pressing
【UP】/【DOWN】
. After finishing the modification, l
and exit the setting.
METER TECHNOLOGY
CO., LTD
No.15, Chenchang Road, Beichen Dist.Tianjin,300134,CN
+0086 022 8478 0358
Tel: +0086 022 8478
to increase/de
crease the input
to save and confirm, and exit the setting interface.
setting status. Then
press 【MODE】
is shown on the screen, it means to need input the permission password. Short press
【MODE】 to shift, use
assword,
short press 【MODE】
setting interface
, otherwise, stay the
Select the e
-bike wheel size
o ensure the accuracy of the display speed and the trip distance.
Short press 【MODE】
is 25Km/h. Changing this value can set
exceeds the set value, the controller will s
top the power
The optional range of max speed setting value is
. After finishing the modification, l
ong press