Chapter 2 Basic Operation 2-15
2. 6 Copying
1. There are several size markings on Original Table which indicate possible feed positions.
Line up Original Guides (1) with the proper markings according to the original width.
2. Place the original on the Original Table with face up.
Then insert it under the Scanner Unit along with Original Guides.
When the leading edge touches the original feeding roller, the machine automatically carries
and sets the original at the proper position.
3. The KIP 3100 will start the print process.
1
NOTE
The scanner unit does not accept originals automatically during Sleep Mode. Touch any area
in the touchscreen and then insert an original.
To Next Page
Loading...
