Chapter 4 Maintenance 4-2
4. 1 Cleaning
4. 1. 1 Scanner Unit
Clean each Scan Glass, Feeding Rollers and Guide Plates once per a week, as the scan/copy
image may become defective if these parts are dirty.
1. Turn off KIP 3100.
2. Open the Scanner Unit pulling up the Levers (1).
3. Wipe each Scan Glass (2), Feeding Rollers (3) and the inside surface with a soft cloth.
Use equal volume mixture of water and a neutral detergent.
NOTE
Do not use organic solvent, glass cleaner and anti-static spray for the cleaning.
1
2 2
3
3
To Next Page
Loading...
