KIP 3100 - 3.1.2 Other Operator Errors; 3.1.2.1 Initial State Message; 3.1.2.2 Deck Open Error; 3.1.2.3 Accessory Error

Chapter 3 Error Correction 3-10
3. 1. 2 Others
3. 1. 2. 1 Initial state
This message is indicated when the KIP 3100 is turned on for the first time.
3. 1. 2. 2 Deck Open
This message is indicated when the Roll Deck is opened.
Close it firmly.
3. 1. 2. 3 Accessory Error
Any error occurs in the optional device such as Auto Stacker or Folder.
Clear the error making reference to the User’s Manual of concerning device.
3. 1. 2. 4 Manual Set NG
This message is indicated when a cut sheet paper is inserted to the Bypass Feeder during
warming up.
Remove it from the Bypass Feeder.
NOTE
You will not find this message because every machine has been turned on at least once
before shipment.
Roll Deck
Bypass Feeder