KIP 3100 - 2.1 Turning on KIP 3100

Chapter 2 Basic Operation 2-2
2. 1 Turning on KIP 3100
1. Ensure that the KIP 3100 is plugged into a dedicated wall outlet.
2. There is a Power Switch on the right side of KIP 3100.
Press its “ I ” side to turn on the KIP 3100.
Power Switch Press “ | “ side.
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Make sure to earth the machine for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are
plugged. It may overheat the outlet and may result in a fire.
(4) The outlet must satisfy the following conditions.
In U.S.A. : 120V plus/minus 10%, 50/60Hz and 15A
In Europe : 220-240V plus 6% or minus 10%, 50/60Hz and 10A