KIP 660 - Specifications; Printer

Chapter 1 Before Use 1-5
1. 4 Specifications
1. 4. 1 Printer
Subject Specification
Model KIP 600 Series
- KIP 650 : 2 rolls wide format color printer
- KIP 660 : 2 rolls wide format color MFP
Type Console, full color and monochrome print/scan
Printing method LED Array Electro Photography, Dry Toner
Color CMYK
Photoconductor Organic Photoconductive Drum
Print Productivity 60mm/sec. (6.0 D/min, 3.1 E/min.) : Color and monochrome
(5.7 A1/min, 2.9 A0/min.) : Color and monochrome
Exposure method Multi-Level (9 levels) LED Print Head
Resolution 600dpi x 2400dpi
Print width Maximum : 914mm (36 inches)
Minimum : 279.4mm (11 inches)
Print length Maximum :
Minimum : 210mm (8.5 inches)
NOTE : If the print is longer than the above, KIP does not
guarantee image quality or the reliability of the media feeding
system.
Plain Paper / Bond 5x standard portrait 6000mm in case of A0/36"
Tracing Paper / Vellum 1x standard portrait
Film 1x standard portrait
Glossy Paper 1x standard portrait
Warm up time Less than 5 minutes
(At 23 degrees centigrade, 60% RH and 208V)
Fusing method Heat roller fusing
Development Contact, mono component non-magnetic development system
Drum charging Charging Roller (KIP CAC Technology)
Transfer Transfer roller
Separation Electrostatic separation (AC)
Media feeding method Automatic - 2 rolls
Rating power 208 to 240V (+6% to -10%), 14A and 50/60Hz
Interface Ethernet 10BASE-T, 100 BASE –TX, 1000 BASE-T
USB 2.0/3.0 (5VDC max)
Power consumption 230V, 50/60Hz
Printing 1.4 kW (Average)
Warm up 3.3 kW (Average)
Ready 0.5 kW (Average)
Cold Sleep 3.2 W (Average)
Acoustic noise Less than 65dB (Printing)
NOTE : Impact noise such as cutting sound is excluded.
Less than 60dB (Ready)
The highest sound pressure according to EN ISO 7779 is 70dB (A) or less.