KIP 660 - Environmental Considerations

Chapter 1 Before Use 1-14
1. 6. 3 Environmental considerations
Take the necessary actions for environmental conditions as shown below.
Humidity(%)
Possible problem Necessary treatment
Low
40%
70%
High
“Void of image”, “crease of paper” and
other problems occurs when you print
with plain paper and tracing paper.
1. Install the humidifier in the room, and
humidify the room air.
2. Remove the paper from the machine
right after the completion of print, and
keep it in a polyethylene bag.
“Void of image” occurs when you print
with tracing paper.
If you will not make print soon, remove
the tracing paper from the machine and
keep it in a polyethylene bag.
Remove the paper from the machine after
everyday use, and keep it in a
polyethylene bag.
“Void of image” occurs when you print
with plain paper and tracing paper.
If you will not make print soon, remove
the tracing paper from the machine and
keep it in a polyethylene bag.
“Void of image”, “crease of paper” and
other problems occurs when you print
with plain paper and tracing paper.
Remove the paper from the machine
right after the completion of print, and
keep it in a polyethylene bag.
NOTE
“Void of image” and “crease of paper” will occur in case of extremely high or low
humidity.
Normal Print
Normal Print
If the media is humidified;
If the media is humidified;
Crease of paper
Loss of image