DP770 Digital Portable Radio Instruction Manual
11
Procedure:
When a call is received in the standby mode:
1) Green LED indicator lights on.
2) The call type (private call icon , group call icon , all call icon ), alias or ID and incoming
call icon is displayed on the LCD.
3) Voice will be heard.
4) You can hold down PTT to call back to current contact within the hang time duration.
Note:
To receive a group call, your radio must be configured as part of that group. (Dealer set it via CPS).
You cannot respond to an All Call.
4.5 Selecting a Zone
A Zone is a group of channels exhibiting the same property, allowing users quickly switch from a
channel group to a different channel group. The radio can be set to have up to 248 zones, each with
a maximum of 128 channels.
You may select a zone through the following way:
1) Press
key to enter the main menu.
2) Select zone item and enter the zone menu.
3) Use "up/down" key to select your desired zone.
4.6 Switching between Digital and Analog Channels
To Next Page
Loading...
Need help?
General
