4-16
REMOVING AN OVEN TEMPERATURE SENSOR
3. Remove the two mounting screws from
the oven temperature sensor and pull the
connectors out of the mounting hole in the
oven liner.
4. Disconnect the sensor connector from the
main wire harness connector.
Oven
Temperature
Sensor
Sensor Connectors
1. Turn off gas supply and disconnect power
to the range.
2. Remove the racks from inside the oven.
WARNING
Electrical Shock Hazard
Disconnect power before
servicing.
Replace all parts and panels
before operating.
Failure to do so can result in
death or electrical shock.
Fire Hazard
Shut off gas supply line valve
before servicing.
Check all gas line connections
and replace all parts and panels
before operating.
Failure to do so can result in
explosion, fire or other injury.
To Next Page
Loading...
