4-6
1. Unplug dishwasher or disconnect power.
2. Turn off the water supply to the dish-
washer.
3. Empty the tub and lay a protective pad
on the floor in front of the dishwasher.
NOTE: There may still be water in the
system from the last wash.
4. While pressing in the tab on the side of the
drawer bottom, push the slide in at least an
inch to disconnect the tub from the slide.
Repeat for the other side of the tub.
TUB BOTTOM COMPONENTS
REMOVING THE TUB
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Drawer Tab
Drawer Tab
(Underside View)
NOTE: The tub is still attached to the unit
by the wiring harnesses connected to the
back.
5. Lift the tub from the slides and set the
tub onto chair with protective pad. You
may need to set the tub on something to
access the components mounted on the
front. Push the slides back into the unit.
Slide
To Next Page
Loading...
Need help?
General
