4-9
11. To remove the heater elements:
a) Remove the high limit thermostat and
the TCO from the heater housing (see
steps 9 and 10).
e) Slide the heater elements out of the
housing.
4 Bottom Cover Screws
Heater Elements (One Element Shown)
9. To remove the high limit thermostat:
a) Disconnect the red wires from the ter-
minals.
b) Remove the two mounting screws.
10. To remove the thermal cutoff (TCO):
a) Disconnect the red wires from the ter-
m
inals.
b) Remove the mounting screw.
Screw (1 of 2)
High Limit
Thermostat
Screw
Blk
Red
High Limit
Thermostat
TCO
b) Disconnect the black and red wires from
the heater element terminals.
c) Remove the 7 top and bottom cover
mounting screws.
3 Top Cover Screws
Top Heater Screw
d) Remove the 2 top and 1 bottom cover
mounting screws from the heater.
2 Bottom Heater Screws
TCO
To Next Page