KITO TCR Series User Manual

26
3.12.3 WARNING! Confirm the adequacy of the rated capacity for all slings, chains, wire ropes and all
other lifting attachments before use. Inspect all load suspension members for damage prior to use and
replace or repair all damaged parts.
3.12.4 WARNING! For Models TCR500P&C, 1000P2&C2, 1000P&C and 2000P2&C2 verify the limit
locks are properly installed on the load chain. For reference see Figure 3-8 for hoist versions 1, A, B
and C and Section 7.3.2. For Models TCR-3000P&C and 6000P2&C2 verify that the chain/limit lever is
operational and can move freely in both the up and down directions. For reference see Figure 3-9.
Versions 1, A and B
Version C Only
Figure 3-8 Limit Switch Components
Figure 3-9 Limit Switch Components
3.12.5 Measure and record the “K” dimension of all hooks on hoist. See Table 5-6 under Section 5,
“Inspection”. Always use the same side of the hook to measure and record the "K" dimension.
3.12.6 Record the hoist Code Number and Serial Number (from the nameplate on the hoist – see Section 10)
in the space provided on the cover of this manual.

KITO TCR Series Specifications

General

Brand	KITO
Model	TCR Series
Category	Chain Hoists
Language	English