SAFETY INSTRUCTIONS
TO THE MACHINE OPERATOR
You must read and understand all operating, safety,
and applications information before attempting
to use this machine.
1. Always wear proper eye protection.
2. Never operate machine unless all guards are in place.
3. Never insert hands or arms into or near cutting area while machine is running.
4. Never load or unload machine while blade is running.
5. Never wear loose clothing, long sleeves, gloves, jewelry, or any other items that may be caught.
Confine long hair.
6. Adequately support stock on both sides of machine to prevent falling.
7. Always disconnect power at source when performing maintenance or making adjustments, other than
those necessary for the normal operation of machine.
8. Keep cutting area clear of tools or other loose objects.
9. Before starting a sawing cycle, be sure vise is securely clamped and machine set-up is correct.
10. Never use this machine to cut workpieces larger than the stated capacity.
11. Never modify a blade to fit arbor.
12. Never use a blade larger than the machine is designed for.
13. When cutting very short pieces, make sure they do not jam between the blade and the slot in the
tabletop.
14. Be aware that the pneumatic vises close automatically and to KEEP HANDS CLEAR!
15. Be aware of the possible sawing problems (see APPLICATIONS section of this book)
16. CAUTION: If blade becomes jammed, immediately turn off power, loosen vise, extract workpiece
from blade, and inspect blade for cracks or broken teeth.
ALWAYS OPERATE MACHINE SAFELY, USING COMMON SENSE AND ALERTNESS
To Next Page
Loading...
General