Optional Minimal Lubrication System
The optional minimal lube system is illustrated and a separate
manual describing it’s use and maintenance is enclosed with this
manual.
Note: The device has a life time warranty if you use original
Unist lubricant
Always use caution installing the blade so as not to damage the
nozzles.
The system has an on/off slide valve located on the input
assembly. It is the chrome cylindrical mechanism see at right,
and sliding it in & out will stop or allow air flow to the system.
The standard flood system may be used in place of it if desired,
and you will find it packed in the coolant reservoir in the base of
machine.
If you wish to use the flood coolant system, simply remove the
minimal lubrication spray nozzle and replace with the flood
nozzle that comes with the flood system.
Upon replacing the spray mist nozzle, make sure to align the
nozzle with the sawblade to prevent damage.
To Next Page
Loading...
General