EasyManua.ls Logo

Kodak 2200 - Page 32

Kodak 2200
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SM731_K2200_01_en 06/2009
6-2
Rated high voltage and maximum corresponding current
70 kV, 7 mA
Current/voltage combinations for a maximum output power of:
490 W, 70 kV / 7 mA
Rated power for exposure time of 0.1 sec.
490 W
Rate of use
At 70 kV, 7 mA and 0.1 sec. and at the maximum tank temperature: one
exposure every 8 sec.
Minimum value of the current/time product in the range of
conformity
0.07 mAs at 7 Ma
Selection of parameters
70 kV / 7 mA and 60 kV / 7 mA
Area of conformity to IEC standard 60601-2-7
Reproducibility of the emitted radiation: conform
Linearity of the emitted radiation: conform
Precision in radiography: conform
Measurement conditions
kV: Indirect measurement using a kV peakmeter
mAs: Direct measurement in the circuit using a mAs-meter
Exposure time: Indirect measurement on the kV signal at 75% of the
peak value
Type of protection against
electric shock
Class 1 equipment
Degree of protection against
electric shock
Type B
Protection against harmful
ingress of water
Ordinary equipment
Operation mode
Continuous operation with
intermittent loading
Flammable anesthetics
Not suitable for use in presence of
flammable anesthetics or a
mixture of flammable anesthetics
with air or oxygen or nitrous oxide

Table of Contents

Related product manuals