Back
Next
Index
Removing an IR or Anti-aliasing Filter
CAUTION:
The Anti-aliasing filter and IR filter are fragile
devices and must be handled with care.
✔ Place a fingernail in the groove at the side
of the filter, and carefully remove the filter.
Inserting a Filter
1 Insert the two tabs at the left side of the filter
into the slots on the DCS 645.
2 Gently press the right side of the filter into
place until it is latched.
☛ Store the unused filter in the pocket of the
included body cap (page 121).
To Next Page
Loading...
