Kodak 645 - Connecting to a Power Supply; Connecting to the AC Adapter; Conserving Batteries

Using the Camera in Portable Mode
87
Contents
Back
Next
Index
Connecting to a Power Supply
When you are working in portable mode, you can
use either a DCS 645 battery or the included AC
adapter (page 62).
Connecting to the AC Adapter
1 Plug the AC adapter into the Power port on the
DCS 645.
2 Plug the AC adapter into a wall socket.
Conserving Batteries
To extend the life of the battery, remember the
following:
✔ Older batteries may not last as long as
newer batteries.
✔ Minimize use of the Image LCD and turn it
off when not in use.
✔ Track the battery’s power level by checking
its icon on the Status screen.