Back
Next
Index
Resolution
You can specify the resolution of the finished files
(TIFF RGB or ERI JPEG) produced by the DCS
645.
1 Display the Properties menu (page 76).
2 Select Resolution.
The Resolution screen appears where you set
the value for the finished images’ resolution in
either pixels/inch or pixel/cm.
Total Actuations
You can determine the number of images
captured by the DCS 645 from the time of its
manufacture.
1 Display the Properties menu (page 76).
2 Select Total Actuations.
The total number of images captured appears.
To Next Page
Loading...
