Kodak 645 - Connecting Flash;Strobe Units; Image Files

The Basics
59
Contents
Back
Next
Index
Connecting Flash/Strobe Units
Connect flash and studio strobes following the
instructions in your camera body’s manual.
Image Files
Images captured using the DCS 645 are saved in
a proprietary file format with a .DCR extension.
You must use one of the following included
software packages to convert the .DCR files to a
format such as JPEG or TIFF before you can
open, view, or print them using other image
editing or processing applications. Alternatively,
you can use the DCS 645 in-camera Processing
function (page 102) to convert the .DCR files to
ERI JPEG or TIFF.
✔ DCS Capture Studio
✔ DCS Photo Desk
✔ DCR File Format Module with ADOBE
PHOTOSHOP 6.0 or greater (ADOBE
PHOTOSHOP is not included)
✔ ERI JPEG File Format Module with ADOBE
PHOTOSHOP 6.0 or greater