Kodak 645 - Attaching the DCS 645 to the Camera Body and Connecting Accessories

The Basics
55
Contents
Back
Next
Index
Attaching the DCS 645 to the Camera Body and Connecting Accessories
Attaching the DCS 645 to the Camera
Body
1 To remove the DCS 645M or 645C body cap,
rotate the DCS 645 Release button to the left
and press, then pivot the top of the cap away
from the DCS 645.
On the DCS 645H, the Release handle is on
the body cap.
To remove the DCS 645H body cap, slide the
handle to the left, then remove the top of the
cap away from the DCS 645.
.
DCS 645
Release
button
DCS 645H
Release
handle