Kodak 645 - Overview; Capturing and Processing Images

Capturing and Processing Images
89
Contents
Back
Next
Index
Capturing and Processing Images
Overview
Capture images using the Shutter Release
button on the camera body. Refer to the User’s
Manual for your CONTAX 645, MAMIYA 645 AF,
MAMIYA 645 AFD or HASSELBLAD H1.
Refer also to the list of features that are not
supported (page 137) when the DCS 645 is used
with the CONTAX 645, MAMIYA 645 AF,
MAMIYA 645 AFD or HASSELBLAD H1.
MAMIYA 645 AF: You must half-press the
Shutter Release button for 1/4 second before
capturing an image. If you press the button fully
to the release position without the half-press
delay, the shutter will not actuate. You must then
fully release the Shutter Release button and
perform a half-press for 1/4 second.
To capture sequential images using a MAMIYA
645 AF camera body, you must completely lift
your finger off the camera body’s Shutter
Release button after each image capture.